Techne TC-3000X Manuel d'utilisateur télécharger pdf (Page 43)

CONFIGURATION

Password pad

[ to accept ]

Program Information

INFORMATION

CONFIGURATION

Warning! The Configuration software should only be accessed by designated personnel, as some

parameters can be changed or may be lost when using it.

Pressing "Enter" while a program is

running will give information about the

current run including which program is

actually running and the unit status e.g.

holding or ramping.

An example is shown here.

The Information field on the front screen

contains all the unit-specific information such

as serial number and software version.

Press "Enter" to access the unit

information.

The complete list is displayed here.

Note that the "Comms address" must be

unique for each unit if more than one cycler is

linked to a PC using the Gensoft control

software.

The Configuration field on the front screen

allows a system administrator access to set up

all the default settings for the programs, time

and date settings and to change and remove

passwords.

Access to the 'Configuration' set up is

password protected.

To enter configuration, use the alpha keys to

type in 'pad'

Press "Enter"

Programs [0]

Information

Configuration

[ , to select ]

Block 20x0.5ml

Block s/n 139160-2

Unit s/n GP0000-01

S/w version 14.zz

H/w version 01

Comms address 1

Unit cycles 624

Block cycles 69

DONNA

Heated Lid on

Status ramping

[ to exit ]

Programs [0]

Information

Configuration

[ , to select ]

[ to exit ]

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Techne TC-3000X Manuel d'utilisateur Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Techne TC-3000X