Techne TC-3000X Manuel d'utilisateur télécharger pdf (Page 32)

[ to disable ]

[ turn on/off ]

30

To edit a temperature, type in the required

temperature. In the example here, the heated

lid temperature is being edited.

Press "Enter" to accept.

Use the "Down Arrow" and/or the "Up

Arrow" keys to select the next field or

step you wish to edit.

To edit a field with on/off settings, first select

the field and press "Enter"

Use the "Up Arrow" and "Down Arrow" keys

to toggle between the settings.

Press "Enter" to accept.

Sample cooling is a new function on the

TC-3000X that enables to be actively cooled

to 4°C whilst the heated lid is reaching the

correct temperature.

To edit a step with both a temperature and a

time, first press "Enter" and type in the

new temperature. Press "Enter" again.

Now type in the new time. The default is

minutes.

1. For whole minutes, type the number

required then "Enter" .

2. To toggle between minutes and hours, use

the "Decimal Point" key.

3. For values less than 1 minute, first press the

"Decimal Point" key followed by the

number of seconds required.

4. For minutes and seconds, type the number

of minutes followed by the "Decimal

Point" key then the number of seconds.

Once the values have been added, press

"Enter" to accept.

Once you have finished editing and you are

happy with the changes, press the "End" key

followed by the "Enter" key to save.

If you press the "End" key a second time

for 'No' then all the changes you have made

will be lost.

DONNA

Heated Lid 105°C

Preheat Lid on

[ edit temperature ]

DONNA

Heated Lid 105°C

Preheat Lid on

[ to change ]

[ to disable ]

[ .for hrs/mins ]

Pause off

-------------------------

In denat 4.0°C 00 m30

[ edit temperature]

9

Pause off

-------------------------

In denat 94.0°C 0 m30

[ edit time ]

0

-------------------------

Fin extn 72.0°C 5m00

Fin hold 10.0°C

[ , to edit ]

[ to save ]

DONNA

Preheat Lid on

Sample cooling off

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 54 55

Commentaires sur ces manuels

Pas de commentaire