Techne TC-PLUS Manuel d'utilisateur télécharger pdf (Page 25)

TEMPERATURE ENTRY

When touching a temperature parameter a temperature entry screen will open. There are two forms of

temperature entry screen:

• A simple form for adjusting the temperature of the instrument parameters such as the heated lid

and program parameters such as initial denaturation and final extension.

• An advanced form when programming step temperatures within a cycling stage that includes the

options for introducing an incremented/decremented step temperature, for example in touchdown

PCR, or a temperature gradient.

Simple temperature entry

• Enter the temperature, type in the required value.

The decimal point can be used for 0.1ºC resolution.

• To clear the entry press DEL.

• If an entered temperature is invalid, a prompt will

indicate the acceptable range.

• Once the temperature is correct, touch OK to return

to the previous screen.

• Touch Cancel to return to the previous screen if no

changes are required.

Advanced temperature entry

• First ensure the number of cycles for the stage has been set then enter the required hold

temperature as described above.

Note: Increase/Decrease Per Cycle will be inactive unless the number of cycles set is greater than 1.

increase the

step

temperature

per cycle

• For an increase in temperature per cycle, touch

the button below Increase Per Cycle to turn this

function on. Next touch the temperature entry

button below this.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Pas de commentaire

Techne TC-PLUS Manuel d'utilisateur Page 25