Techne TC-3000G Manuel d'utilisateur télécharger pdf (Page 39)

The Hold Temperature of the incremented/decremented step is the defined Hold Temperature plus the

summation of the increments/decrements. The first cycle is never incremented/decremented, only

subsequent cycles. If you select a decrement, the Hold Temperature is prevented from falling below 4°C.

If you select an increment, the Hold Temperature is prevented from rising above 99°C.

Similarly, under normal circumstances, the Hold Time of all steps is constant. However, it is possible to

automatically increment or decrement the duration of a specified step of a program.

Temperature profile of incremented Hold Time at step 3 of each cycle

The Hold Time of the incremented/decremented step is the defined Hold Time plus the summation of the

increments/decrements. The first cycle is never incremented/decremented, only subsequent cycles. If you

select a decrement, the Hold Time is prevented from falling below one second.

Cycle 1

Cycle 2 Cycle 3 Cycle 4 Cycle 5

+3∂

Temperature

+4∂

+2∂

+∂

TO PROGRAM INCREMENT OR DECREMENT TEMPERATURE OR TIME

Under normal circumstances, the Hold Temperature of all steps is constant. However, it is possible to

automatically increment or decrement the temperature of a specified step of a programme.

Temperature profile of incremented Hold Temperature at step 3 of each cycle

Cycle 1

22222

Cycle 2 Cycle 3 Cycle 4 Cycle 5

+4∂

+3∂

+2∂

O+

∂

Temperature

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Pas de commentaire

Techne TC-3000G Manuel d'utilisateur Page 39